I’ll do some more digging. Is this only valid for the hdhomerun tuner? I will report my findings then. Now, I’m taking a close look at the config-native log for the scans, and I believe that this driver actually does NOT support specifically setting the Modulation Type, as is evident in the following entries: Thanks for the help, made the entry but a no go.
|Date Added:||18 April 2011|
|File Size:||36.96 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
It seems that there are two more chips that sit in front of the eMPIA chip.
Now, I’m taking a close look at the config-native log for the scans, and I believe that this driver actually does NOT support specifically setting the Modulation Type, as is evident in the following entries: It looks like it is pollible that Kworld provided a different way to do it. kwa-tsc
KWorld ATSC 340U Installation Manual
So tomorrow, when I have time, I will reboot the machine. You should be able to disable and re-enable the device in the device manager. We would need to know the video and audio PIDS. I set up a second configuation as shown at the beginning kw-stsc this thread for antenna mode.
KWorld UBQ USB ATSC TV stick – LinuxTVWiki
Do a scan then zip and attach the config. Or do it from TotalMedia. Does anyone know more about this?
It does not line up with what I am manually mapped out with the Hauppauge I had one problem though: And now, the channel scan doesn’t even lock onto the signals. I bet once Microsoft Media Center get its update and QAM will finally be supported IF it is supportedthis KWorld dongle will work right out of the box because Microsoft knows how to make magic and the rest of the world are just slaves to Microsoft Now unplugging and replugging puts it into cable mode.
The word mode shows up in a few places. This website is using cookies. I think these numbers come about in error because the actual major and minor channel numbers are only 10 bits long and are packed, so some times if they are grabbed as words there are some non zero values in the upper 6 bits.
Where are the BDA calling conventions listed?
They just handle the main channel primarily. Some time I’ll do some searching on the air waves. Some cards use proprietary schemes for QAM. And I am really not sure who the biggest culprit is!! Kw-atsf for the help, made the entry but a no go.
So enabling and disabling puts it in cable mode, even if TotalMedia left it in antenna mode. Since it is locking onto a signal, it is probably already automodulating. D there was also a.
KWORLD ATSC U INSTALLATION MANUAL Pdf Download.
I have actually contacted both KWorld and Arcsoft with a request to reveal a bit more information on how to ka-atsc it to work with other software. I guess they are including the incripted ones. To go back to ATSC antenna mode you can unplug the device to reset it. Not all the OTA channels are handled by cable. I missed that post. You can find it by doing the following: There’s not enough data there.